* Simple Instruction 1. The blind 1) Browse item - Read each item by holding down and moving with one finger on screen. 2) Browse next item - Points out items in order when quickly swiping towards right with one finger on screen. 3) Execute item - Double touch quickly to execute items including all icons, menu, buttons, and etc.. 4) Scroll - Move two fingers on lock screen or list screen to scroll. 5) Reconfirm item - To re-read or stop pointed items, draw a line towards the bottom with one finger. 6) End voice mode - Voice mode ends when continuously swiping up and down with one finger. 7) Start voice mode - Voice mode starts again when touching notification bar on the top of the screen. 8) Command according to situation - When swiping up with one finger, it operates automatically according to the situation. Such as opening lock screen, receiving call, ending call, or reading all contents of screen. 9) Shortcut command - Shortcut command panel opens when swiping left and right continuously with one finger. 10) Pause voice mode - Pause or restart voice most by swiping one finger up and down continuously. 2. People with Low Vision 1) Stop zoom mode - Zoom mode pauses when swiping one finger up and down continuously. 2) Start zoom mode - When touching the top notification bar, the paused zoom mode starts again. 3) Zoom letter - When holding and moving screen with one finger, the items become zoomed. 4) Execute item - Double tab or tab once to execute items such as all icons or buttons according to option. 5) Scroll - Move two fingers on lock screen or list screen to scroll. 6) Zoom next item - Quickly draw a line towards the right on the screen with one finger. Items will be pointed out in order. 7) Reconfirm zoom letter - Draw a line towards the bottom with one finger to zoom or stop the pointed item. 8) Command according to situation - Separate view appears by zooming all letters on the screen when swiping up with one finger. 9) Zoom/Voice change - Change to Zoom/Voice mode by swiping up continuously with one finger. 10) Shortcut Command - Shortcut command panel opens when swiping left and right continuously with one finger. 3. Vision Protection (Presbyopia, People with Low Vision) 1) Indicate candy bar - Candy bar appears when touching the top right corner on the screen. 2) Hide candy bar - Candy bar disappears when touching the white band (right end of candy bar). 3) Read Screen Text - After pressing red band, move the point of screen for voice to read contents. 4) Read all contents of screen - After pressing orange band, touch the words for voice to read all contents. 5) Zoom screen text - After pressing yellow band, move the point of screen for contents to be zoomed. 6) Zoom all contents of screen - After pressing green band, touch the words on screen for all to be zoomed. 7) Move candy bar - Press and hold white band and move up and down. 8. Change candy bar zoom function - Move while pressing on white band, then let go when new candy bar set appears for change. 9) Change settings - Long press white band for setting screen. 10) Corner shortcut function - Double tab or long tab at the right corner of the screen to execute. designated app (widget) (Register app designation in ‘settings’. Only operated when candy bar is hidden. * Basic Understanding of ShinePlus What is ShinePlus? ShinePlus is software that reads aloud text and zooms the text on Android. - Applicable on all apps that operate in background. - Very useful for the blind, people with bad vision, or people with visual impairments due to presbyopia, dyslexia, and eye disease. 2. Characteristics of ShinePlus - ShinePlus can be used by combining zoom and voice according to user type and various sight characteristics. - Voice/zoom mode can be turned on/off so that it operates accordingly to the pattern of use for people with bad vision. - Functions (whisper, ear talk) are included to prevent the exposure of privacy due to voice output. - Improves usability about the apps widely used, and includes ‘mobile accessibility’ tool. -The app is used for vision protection as ‘HIDE UI’ function with beautiful design. 3. Installation - ShinePlus operates normally on versions above JellyBean. - ShinePlus can be downloaded from Google ‘Play Store’. -After installation, execute ShinePlus icon and execute settings. -When executing ShinePlus icon, screen that recommends ‘Keyboard’, ‘TTS voice engine’ installations appears, but it can be passed. (Automatically passes when phone is generally supported.) - Next is a screen to select type of use. For the blind, select ‘Voice oriented zoom support’. For people with vision under 0.1, select ‘zoom oriented voice support’. Others select ‘vision protection’ button. -The ‘type of use’ can be easily changed in ‘settings’ - Next, select ‘ShinePlus’ and ‘Accessibility’ items in order according to the guidance indicated on the bottom of the screen, then press activate button. - Agree on the terms for accessibility and all work is done. - Read the ‘quick manual’ - (Precaution) Close other accessibility apps (TalkbacK) before use. 4. Delete 1) Complete Removal - Select ‘Application’ ‘ShinePlus’ items in order from Android Setting. -Press ‘delete’ to remove completely. 2) Stop Operation - Select ‘Application’ ‘ShinePlus’ items in order from Android Setting. - Press ‘deactivate’ button to stop operation of ‘ShinePlus’. 5. ShinePlus Home - ShinePlus Home screen appears when executing ShinePlus icon. (Setting screen appears when starting ShinePlus for the first time. After setting, ‘ShinePlus Home’ automatically appears). - More contents are provided for the use of ShinePlus on ‘ShinePlus Home’. - Refer to ‘ShinePlus Home Main Service’ for details. 6. Changing ShinePlus Setting - There is ‘setting menu’ to change functions on ShinePlus. - Execute ShinePlus icon. - Execute ‘ShinePlus setting’ menu. Various options are prepared by section. 7. Update 1) Automatic Update - ‘Update Message Dialog’ appears when using ShinePlus if there is update. - Press ‘update’ button to execute update 2) Manual Update - Execute ShinePlus icon. - Execute ‘Update’ menu item. - Move to the corresponding app store when there is update. - When new update does not exist, the previous version’s ‘report’ is outputted. 8. Additional Install 1) TTS Installation - For ShinePlus to run normally, ‘TTS Voice Engine’ must be installed on the phone. - If the engine is not installed, additional installment is needed. - In this case, download ‘GoogleTTS’ for free. - Download is informed on the ShinePlus initial settings. - High Quality TTS are recommended by visiting ‘Store’ of ‘ShinePlus Home’. 2) Keyboard - Basic ‘keyboard’ needs to be supported with ‘mobile accessibility’ to enter letters on ShinePlus. - If basic keyboard is not supported, additional installment is needed. - In this case, download ‘Google Keyboard’ for free. - Download is informed on the ShinePlus Initial settings. - High quality keyboard is recommended by visiting ‘Store’ of ShinePlus Home’. 3) Web Surfing - Use ‘Google Chrome’ as basic web browser for normal web surfing on ShinePlus. - If ‘Chrome’ is not installed, it can be downloaded for free. - ‘Chrome’ can be downloaded by visiting ‘Store’ of ‘ShinePlus Home. 4) ShineTools - ShineTools is a mobile software product specialized for supplementary engineering for those who have visual impairments. - There are various app tolls including electronic magnifier, recorder that removes TTS sound, and etc. - ShineTools operates with ShinePlus. - Various ShineTools can be downloaded by visiting ‘Store’ of ‘ShinePlus Home’. * Main Operating Methods 1. Operation Concept 1) Navigation - ‘Navigation’ is the process of checking contents of screen. - It is the same as normal sighted people looking at the screen. - Operations include ‘swipe’ and ‘hovering’. 2) Execution - This is the process of commanding when the item can be operated in the searched screen. - Commands include open app, change screen, and move screen. - Operations include ‘Drag’ and ‘double tab’. - ‘Navigation’ has no change in screen; ‘Execute’ has change in screen. 3. Selection 1) Selection is the concept of navigation and execution combined. - For blind equipment control, navigation and execution can prevent confusion rather than expressing settings as selection. 4) Element, Object - This is the minimum search unit indicated as the element that composes screen. - It is classified visually and can be pointed out to become target of operation. Navigating screen contents refers to pointing out object units. 2. Basic Operation 1) Hovering - As a basic operation method of navigation, this is the process of checking contents by moving here and there with hand hovering the touch screen. - ‘Hovering’ is used to quickly navigate when knowing the item’s location. - The operation is not valid when the hand is not in contact with the screen. 2) Swiping - As another operation method of navigation, swiping refers to quickly moving to the right like drawing lines by contacting the fingers to the left part of the screen (Swiping to the right). - ‘Swiping’ focuses the screen contents in order. Thus the contents do not have to be found. 3) Double Tab - As basic operation method of execution, Double tab is pressing twice quickly in the certain area of the touch screen. - When pressing slowly or when it becomes one tab, the focused item is changed and the navigation process starts from beginning. 4) Scroll, Drag - As another type of execution, two fingers are on the touch screen moving left and right or up and down to move the contents. - This is usually used in unlocking lock screen, list screen, and next page. 5) Hover Action - Hovering action is the operation method of combining action to search and navigation. - This action can be executed by taking hands off the desired item while ‘hovering’ - When getting used to the instruction, hovering action is used for dialing or keyboard input. 3. Training Operation 1) Looking into ‘Hover Action’ - While moving with hands hovering on the item marked on the touch screen, hover action is the method to execute item by taking hands off the item. - Used for quick movement for phone dialing, ARS dial, keyboard input, and command panel. 2) Looking into ‘One Hand dragging’ - ‘One hand dragging’ is moving while touching twice in a row in a certain area when scrolling through list screen or page. - Movement must be made without taking hands off when touching twice. - This operation is same as moving with two fingers. 4. Basic Shortcut Gesture 1) ‘Down Swipe’ - Pause or re-check voice or zoom of item contents that are current focused. - Can read or indicate zoom when ‘Down-swipe’ in same item. - Rechecks last letter when inputting in edit window. 2) ‘Up Swipe’ - Automatically executes command according to the screen situation. - Up-swipe to make calls after entering phone number. - Receive call by up-swipe. - end phone calls by up-swipe during a call. - Transfer calls by up-swipe while waiting for call. - Up-swipe to stop music while listening. - Open lock screen by up-swipe in lock screen. - The whole screen page is read in voice mode by up-swipe when doing nothing. - Text viewer is zoomed by up-swipe when doing nothing. 3) ‘Up and Down Swipe’ - Stops voice and zoom mode. - Stops voice and zoom mode and operates in normal screen. - Transfer to normal person or applies as people with bad vision. - Press the top ‘notification bar’ to start again. - Press home button three times on versions above KitKat. - Turn off power and turn it back on in case of emergencies. 4) Side and Up Swipe - Change to ‘voice mode’ and ‘zoom letter mode’. - Useful to use voice and zoom function. - This mode is maintained when starting again after stopping in the corresponding mode. 5) Left and Right Swipe - Calls ‘command panel’. - ‘Command Panel’ is designed to execute the functions that are used often when using ShinePlus. - Main functions are arranged by rows, and detailed functions are composed by column. - ‘Hover action’ and ‘execution after navigation’ are both supported in the desired function item. - Refer to ‘Instructions by main function’ for details including ‘Command Panel’. 5. Trained Shortcut Gesture 1) ‘Down Swipe Twice’ - Reads all contents entered in Voice Mode and Edit Window. - Zooms all contents entered in Zoom Mode and Edit Window. 2) ‘Up Right Swipe’ - Moves to previous page or list screen. 3) ‘Down Right Swipe’ - Moves to next page or list screen. 4) ‘Up Left Swipe’ - Moves to top item of current screen 5) ‘Down Left Swipe’ - Moves to bottom item of current screen. 6) ‘Left Turn Swipe’ - Sets or closes ‘cover mode’ in voice mode. - The touch operation can be done when the ‘cover mode’ screen is off. - Very useful for power saving in ‘cover mode’. - In zoom mode, it sets or closes functions for ‘blue light and color sense calibration’. - ‘Blue light’ blocks the blue shades of colors that give tiredness to the eyes. - ‘Color sense calibration’ helps to classify colors. 7) Right Turn Swipe - Moves to marked location or executes designated function in mobile accessibility. - Marked information can be registered through corresponding function in ‘command panel’. - Marking is the same function as a bookmark. - Designated accessibility function is executed in screen situation that applies mobile accessibility. 8) Down Left Turn Swipe - Automatically sets or closes ‘whisper mode’. - ‘Whisper mode’ outputs voice as small speaker. - ‘Whisper mode’ function prevents privacy invasion due to voice exposure. 9) Bottom Right Turn Swipe - Designated app is brought out from ‘App to Plug-In’ in Shine Settings. - Phone Dial (shortcut keypad) is brought out in general - After entering number key in dial pad, pressing sharp (#) will execute designated app. - Use ‘short key’ in command panel to designate short key. * USEFUL TIPS 1. People with Bad Vision - People with bad vision uses ‘zoom letter’ and ‘voice output’ when necessary. - Up Down Swipe can pause ‘voice and zoom mode’. - Slightly press ‘notification bar’ on the top to bring out ‘Voice and zoom mode’. - To change from ‘voice mode’ to ‘zoom mode’, use ‘Down and Up’ Swipe. -When user interface is ‘Zoom oriented voice support’, one touch is supported to execute icon. - In this case, scroll (including lock screen) is controlled with two fingers. - When ‘Voice and zoom mode’ is not used often, change to ‘vision protection’ on Shine Setting. - Using ‘Voice/Zoom mode on only typing’ and ‘Voice/Zoom mode on only entered contents’ are very convenient. 2. Read Notification Bar and Open Notification Window - ShinePlus can navigate top notification bar with Voice and Zoom Mode. - Notification bar usually indicates notification information, phone status information, and time. - Double-tab while reading notification bar easily brings outs notification window. - Notification window opens when dragging notification bar down with two fingers. 3. Start Button - ShinePlus always indicates ‘Start Button’ on the menu item on the left part of the notification bar. - Double tab ‘Start Button’ item on notification bar to execute ‘start screen’. - All apps, navigation, shortcut pad, and other contents are indicated on the start menu. - Recently executed apps and contents are arranged in order on the start menu. 4. Quick Setting - ShinePlus indicates menu items ‘Quick Setting’ on the right of the notification bar. - Double tab ‘Quick Setting’ on Notification bar to execute ‘Quick Setting’, - All setting items including phone are indicated on ‘Quick Setting’, 5. Cell Board - Cell board is the function that hovers each character string and rechecks them. - When pointing to character string and bringing out command panel, the cell board is indicated on the bottom of the screen. - Each cell of the cell board is indicated in word unit at first, and then indicated as one letter when pointing twice. 6. Gesture Safe mode - Gesture Safe mode is the function to prevent mistake of changing focus to undesired position while operating. - All touches during Gesture Safe mode are ignored. - Gesture Safe Mode is applied as default. 7. Blocking continuous reading interruption - Prevents screen from turning off when reading long documents by voice. - In this case, the screen goes into power saving mode without screen turning off. - Prevents undesired touch while reading long documents by voice. - In this case, down swipe to stop. 8. Download Sound - ShinePlus outputs sound when downloading so that user can recognize. - ‘Tic-Toc sound’ is outputted when downloading or installing app on phone. 9. Auto Recovery Function - When screen goes off, ShinePlus automatically optimizes ShinePlus status on phone. - When problem occurs due to this, turn off screen and turn it back on to solve the problem. - When volume drops to below 20%, the volume recovers to 50%. 10. Continuous Reading for Documents - Down Swipe to pause the voice that is reading long document. - Up Swipe to continue reading from the paused part. * Frequently Asked Questions 1. What is the minimal installation requirement? - Operates on versions above Android 4.1. 2. How do I use Main Functions like Ear Talk? - Main function is set on ‘Shine Setting’ and ‘Command Panel’. - Bring out command panel by ‘Left and Right Swipe’ for ‘Command Panel’. 3. Voice won’t stop when touching. What should I do? - Down Swipe to stop voice output. - It is normal that voice does not stop in long sentences. - This is to prevent stopping voice due to undesired touch. 4. What are some of the deactivated functions? - The functions that are in BETA TEST before providing in next official version. 5. What role does ‘User Type’ have? - There is ‘Voice-Orientation’, ‘Zoom Orientation’, and ‘Vision Protection’ for ‘User Type’. - ‘User Type’ is a function that provides information by maintaining optimal status for users. - User shall select ‘Voice-orientation’ if blind. - User shall select ‘Zoom-orientation’ or ‘vision protection’ for those with bad vision. - Select ‘Vision protection’ for those with no disorder. -‘User Type’ is in menu item of ‘Shine Setting’. 6. Internet surfing is not operating well. What should I do? - ‘Google Chrome’ must be used for web surfing. - Web document must be loaded to use on other browsers. 7. Keyboard does not read. What should I do? - Use keyboard that supports minimal accessibility to enter words on ShinePlus. - ‘Samsung Keyboard’ is usually supported, but ‘Google Keyboard’ is more exact. - Also, ShinePlus Home’s ‘Store’ recommends good keyboards. 8. What is the difference between settings between ‘Shine Setting’ and ‘Command Panel’? - ‘Shine Setting’ and ‘Command Panel’ may have same item names. - In this case ‘Shine Setting’ shall save set values so that it can be maintained even when power is off. - ‘Command Panel’ is recovered to the saved value on ‘Shine Setting’ when the phone is turned off. 9. ‘Whisper’ and ‘Ear Talk’ are not working well. What should I do? - These functions are influenced with phone hardware from ShinePlus Functions. - The functions may not run normally according to some phones. - In this case, try to change ‘ear talk sensitivity’ in ‘Shine Setting’. - Release corresponding item on ‘Shine Setting’. 10. Pop-up appears at times. How do I use it? - Pop-up window appears at least one time every day. - This pop-up window provides ‘instruction/tip’, ‘news/notification information’, and ‘advertisement’. - This pop-up cannot be deactivated. However, the pop-up window does not appear when receiving or sending calls or when it is being activated. * Problem Solving 1. When operation does not work on Internet Web Surfing? - ShinePlus is optimized on Google Chrome. - Google Chrome is recommended for web surfing. - Web contents must be fully outputted on other web browsers. 2. When Navigation works but voice is not outputted? - Voice is not outputted in zoom mode. - Change to ‘voice mode’ by ‘Down and Up’ Swipe. - Turn off screen and turn it back on if problem continues. 3. When voice is outputted when turned off? - When selecting ‘Voice oriented zoom support’, the voice mode is recovered when turning screen off and back on. - This is a safety function to prevent misuse of users due to voice pause. - If this function is not desired, change to ‘Zoom Orientation Voice Support’. - When web document is opened on Android 4.1 and 4.1.2, the voice is outputted at times. 4. When Zoom letter does not work during web surfing? - ShinePlus is optimized to Google Chrome. - Google Chrome is recommended for web surfing. - This may occur on other web browsers. 5. When sound is low? - Check if the sound is outputted from the small speaker of the phone (part which comes in contact with ears), - Whisper mode may be activated. - Turn off and Turn on screen. 6. When mobile accessibility and label are not applied? - App and Version have to concord for mobile accessibility and label function. - Mobile accessibility script file is provided in recent app. - User label must be entered after deleting existing script file. 7. Other unknown Conditions? - The main function of ShinePlus is reading the contents of screen or zooming. - Various conditions occur because many apps are installed on the phone. - When unknown conditions occur, check for changed settings on existing apps or installed apps. 8. Precaution - Other accessibility apps (such as Talkback) cannot be used when using ShinePlus. - This may cause various errors while operating. - Use Wi-Fi for ‘Web Contents’ or ‘Store’ from ‘ShinePlus Home’ - Fee may occur for video web contents. - When changing TTS Voice engine, it must be applied by turning the screen off and on. - After changing keyboard, turn off screen so that TTS is compatible. - Sound may not be heard when dialing during whisper status. - Make phone calls when whisper mode is off. * Instruction by Main Function 1. Voice Mode 1) Screen On/Off voice Information - Is there information I need when screen comes on? - To use this function, output information including ‘date’, ‘time’, ‘battery percentage’, and ‘signal tone’. - Applicable on ‘Shine Setting’. 2) Signal Tone - Is signal tone irritating when navigating screen? - Set or close signal tone when using this setting. - Applicable on ‘Shine Setting’. 3) Voice Output in Off-Screen - Do you want a quiet smart phone? - Voice is not outputted when screen is off in this setting. - This function is strongly maintained even when screen is temporarily on. - Applicable on ‘Shine Setting’. 4) Notification Information Setting - Do you want to only hear important information? - Important information that is sent is outputted when using this function. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 5. Document Continuous Read - Do you want auto read when touching long sentences? - Stop and Continue Reading functions are possible when reading long sentences while using this function. - There is no stopping because the function prevents screen from turning off while reading. - Applicable on ‘Shine Setting’. 6. Object Type - Do you want the navigated item to be read clearly? - When using this setting, only name of item is outputted and detailed types are not outputted. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 7) Keyboard Echo -Do you not want repetitive voice when keyboard touch is entered? -When using this setting, voice is not outputted when entering letters with keyboard. - (precaution): Useful for countries that use alphabets. -Applicable on ‘Shine Setting’ and ‘Command Panel’. 2. Zoom Setting 1) Text Highlight Background and Text Color - Are your eyes tired from text highlight color? - Change background and text color to clearly recognize the words by using this setting. - Applicable on ‘Shine Setting’. 2) Text Highlight magnification - Is the text highlight word still small? - The word used for this setting can be magnified by 16 times. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 3) Text Highlight Speed - Is the highlight speed slow on long sentences? - The speed of highlight for long sentences can be adjusted when using this function. - Applicable on ‘Shine Setting’ and ‘Command Panel’. - Control with volume key for text highlight on versions above Android 4.3. 4) Text Highlight Transparency - Is the text highlight annoying on the screen? - Text highlight background becomes transparent in this setting. - Applicable on ‘Shine Setting’. 5) Zoom Mode One Touch Setting - Do you want to break away from double tab? - All operation is done by one touch for all icons and menus in Zoom Mode when using this setting. It is zoomed when dragging. - However, two fingers should be used when scrolling. - Applicable on ‘Shine Setting’. 6) Temporary Navigation of Voice and Zoom - Do you want to only use Zoom letter? - When using this function, temporarily use zoom mode by pressing notification bar. - Applicable on ‘Shine Setting’. 4. Communication Setting 1) Voice setting for Receiving Call information - Were you surprised when voice reads phone number? - Select voice output for phone number when phone rings. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 2) Voice Setting during Call - Does TTS Voice interrupt your conversation during call? - Select TTS Voice Output during all by using this function. - Applicable on ‘Shine Setting’. 3) Keypad Touch Method for Making Calls - Double tab and phone keypad difficult? - Dial button is changed to one tab or double tab when using this function. - Applicable on ‘Shine Setting’. 4) ARS Keypad Touch Setting - Do you miss entering time because of ARS keypad double tab? - ARS Keypad is changed to one tab or double tab when using this function. - There may be difference for Android version, or ShineQWERTY should be selected. - Applicable on ‘Shine Setting’. 5) Dial Keypad Touch Echo Setting - Is it confusing that the navigated input value is read again? - Click dial button and then disable the entered value for this setting. - Applicable on ‘Shine Setting’. 6) Gesture Sensitivity Related to Call - Does making call and ending call react sensitively? - This function prevents undesired gesture operation during call. - Applicable on ‘Shine Setting’. 4. Touch and Operation Setting 1) Gesture Safe Mode - Do you touch your screen every time you use swipe? - This function prevents undesired swipe during gesture. - Applicable on ‘Shine Setting’. 2) Command Touch Method - Do you want to quickly execute internal functions of command panel? - Functions included in command panel are changed to one tab or double tab. - Applicable on ‘Shine Setting’. 3) Home Key Triple Tab Setting - Do you want to quickly switch between ‘Voice/Zoom Mode’ and ‘Vision Protection Mode’? - Change quickly from Voice/Zoom Mode to Vision Protection Mode by pressing home key three consecutive times. - There is a substitution effect to execute and close voice/zoom mode. - Applicable on ‘Shine Setting’. 4) Long Tab Method Setting - Is Long Tab difficult? - Simple press for a long time for operation when using this function, - Applicable on ‘Shine Setting’, 5) Menu and Cancel Key Touch Method - Are you worried that you will touch the cancel key by accident? - Hardware Menu key, cancel key are changed to one tab, double tab when using this function, - Applicable on ‘Shine Setting’, 6) Hardware Keyboard Setting - Do you want to execute remote navigation via Bluetooth? - Screen navigation can be executed via external keyboard when using this function. - Basic setting only controls focus. It does not navigate screen. - Applicable on ‘Shine Setting’. 7) Changing Menu Key to Multi Key - Do you want exclusive key for multi-tasking? - By using this function, recently executed app list becomes activated when pressing menu key. -O Function is valid on phones (Samsung Galaxy) with physical menu key. -Applicable on ‘Shine Setting’. 8) Invalid Object Pass - Do you want optimized web surfing? - By using this function, insignificant objects are not navigated. - Very useful for web surfing. - Applicable on ‘Shine Setting’. 9) Volume Key TTS Default - Do you want to control TTS with volume key? - The volume key changes from phone bell to TTS when using this function. - The function is automatically closed when turning off screen and turning it back on. - Applicable on ‘Shine Setting’. 5. Usability 1) Designate up or down gesture on initial screen - Do you want to execute the desired app as soon as the screen comes on? - By using this function, desired app can be executed by ‘up swipe’ and ‘down swipe’. - This function is valid only on the initial screen. - Applicable on ‘Shine Setting’. 2) Shortcut Home Key Setting - Do you want designated app to be executed when turning on screen? - By using this function, desired app can be executed when pressing home key on off-screen. - Applicable on ‘Shine Setting’. - Double tab on home key may be necessary for some phones. 5) Lock screen setting - Do you want to disable lock screen? - By using this function, lock screen can be set or disables. - Applicable on ‘Shine Setting’. - This is not effective when the lock screen is secured. 6) Voice setting for only typing - Do you want voice/zoom mode when only typing? -By using this function, voice/zoom mode is activated only when typing even when the mode is off. -Applicable on ‘Shine Setting’. 7) Zoon setting on input text - Do you want to zoom input text? - By using this function, the text is magnified when pressing on input window for a long time even when the mode is off. - Applicable on ‘Shine Setting’. 8) Voice mode for only input text - Do you want to output voice for only input text? - By using this function, the voice for text is outputted when pressing on input window for a long time even when the mode is off. - Applicable on ‘Shine Setting’. 9) Screen Text Translation - Do you want to translate the screen contents to another language? - This setting allows translation to another language. - Applicable on ‘Shine Setting’. - Navigate the text to translate and use in ‘Command Panel’. - Press ‘sky blue band’ on candy bar to navigate text. 10) App to Plug-In - Do you want to change the useful functions on app? - By using this function, UI or useful functions from external apps can be used to effectively use on ShinePlus. - Currently, there are ‘dial keypad’ and ‘short key pad’ included in the function. - More items are to be added to App to Plug-In in the future. - This function is brought through ‘Down Right Turn Swipe’. - Applicable on ‘Shine Setting’. 6. Privacy 1) Whisper - Do you know about whisper function? - Whisper is the function that outputs TTS voice through the small speaker that comes in contact with the ear. - This function is very useful in environments with noises or when in embarrassing situation. - Activate ‘Whisper Auto Mode’ on ‘Shine Setting’ or ‘Command Panel’. Down and Left Swipe to execute automatically. 2) Whisper Auto Mode - Do you want contents of the screen to whisper? - By setting this function, TTS voice whispers while the screen is on. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 3) Whisper Auto Execution - Do you want Whisper Function to be executed when necessary? - By using this function, whisper function is executed without putting it by the ear. - Use ‘Down Left Swipe’ to set or close function. 4) Whisper Navigation Control - Do you want to navigate screen via volume key? - By setting this function, objects of screen can be navigated by volume key in ‘Whisper Auto Mode’ - Applicable on ‘Shine Setting’. 5) Block Whisper Touch - Does it bother that the ear touches the screen? - By setting this function, it prevents ear from touching the screen in Whisper Auto Mode. - Applicable on ‘Shine Setting’. 6) Ear Talk - Do you know about Ear Talk Function? - Another smart world begins when the screen goes off. - Ear Talk provides convenient information based on various voices and is a function that operates when holding by the ears while screen is off. - Applicable on ‘Shine Setting’ and ‘Command Panel’. 7) Ear Talk Function - Do you want to receive SNS like phone call? - By using this function, you can receive SNS, notification, and information about time by through whisper function. - Listen to SNS after 2 minutes through Ear Talk. - Applicable on ‘Shine Setting’. 8) Haptic Braille - Do you want to feel braille through vibration? - By using this function, the bottom 6 cell line is changed to braille for every navigated sentence and outputted via vibration. - User can feel the vibration from left to right by placing finger quickly across the screen divided into 6 columns. - Apply on ‘Shine Setting’. Then operate by using ‘up and Down Swipe (close voice mode)’. - (Precaution) this function can only be used when set to ‘Voice oriented zoom support’. 7. Finger View 1) Finger View Possible - Do you want sensible touch screen? - By using this function, voice and zoom are indicated when sliding finger between texts on normal screen - However, Scroll must be used with two fingers. - Applicable on ‘Shine Setting’. 2) Exclude First Item (Finger View) - Do you want to disable touch when touching text? - By setting this function, text is not zoomed when passing the first text in finger view screen. - Applicable on ‘Shine Setting’. 3) Press-Press (Kook-Kook) mode - Are you worried that item is executed with slight touch? - By using this function, all items must be pressed hard to be executed. - Applicable on ‘Shine Setting’. 4) Block screen external touch - Are you bothered that the screen is touched when holding the phone tightly? - By using this function, external touch of screen is prevented. - Applicable on ‘Shine Setting’. 8. Candy Bar 1) Activate Candy Bar (indication) - Do you want functions related to voice and zoom to be indicated beautifully? - Tab the top right corner of the screen for Candy Bar. - After pressing red band, move with finger hovered on contents of the screen for voice output. 2) Zoom Candy Bar Screen Contents - Do you want to zoom some of the contents of the screen? - After pressing yellow band, move with finger hovered on the contents for zoom. 3) Zoom all Candy Bar Screen Contents - Do you want to zoom all contents of the screen? - After pressing green band, tab the contents of the screen. All contents from that point are zoomed. 4) Hide Candy Bar - Do you want to hide Candy Bar from the screen? - Press the white band on the right end of the candy bar to disable candy bar. 5) Expand Candy Bar Function - Are you curious about the hidden functions of Candy Bar? - Press ‘White band’ on the right end of the candy bar and move while holding. New candy bar set is indicated. - There are ‘voice/zoom’, ‘screen filter’, ‘Search’, and ‘App management’ in Candy bar set. 6) Move Candy Bar - Do you want to move candy bar’s location? - Candy bar location can be moved up and down. - However, the range is from top of the screen to the middle. - To move the candy bar, press ‘white band’ on the right, hold, and move. 7) Changing Candy Bar Size - Is the candy bar hard to see? - By using this function, candy bar’s thickness can be changed. - Applicable on ‘Shine Setting’. 8) Changing Candy Bar setting - Do you want to change various settings of Candy Bar? - Long-press the white band on the right end of the candy bar for setting screen. 9) Side Tab - Do you want to quickly bring out desired app in any situation? - Double tab or long tab the top right corner of the screen to execute designated app. - Applicable on ‘Shine Setting’. 10) Blue Light - Are your eyes tired from the light from screen? - By using this function, your eyes become comfortable because the function blocks blue light that is bad for the eyes. - Applicable on ‘Shine Setting’ and Candy Bar (Purple Band). 11) Direct App - Do you want to quickly bring out apps in any situation? - Select ‘Direct App’ set by moving Candy Bar. - Execute apps that are used often. - By long-pressing the desired band on candy bar, the current executed app becomes designated. - By pressing the corresponding band, the app is executed in any situation. 12) Enhanced Color - Is it difficult to classify red with green? - By using this function, particular colors (red, green, and blue) stand out or become weakened to help classify each color. -Applicable on ‘Shine Setting’ and Candy Bar (Purple Band). 9. Move and Edit Navigation 1) Control Navigation Unit - Do you want to check each word on text? - By using this function, text can be searched by ‘letter’, ‘word’, ‘line’, ‘paragraph’, and ‘default’ unit. - After activating function, operate by left or right swipe. - Default recovers object unit to original status. - Select corresponding text and apply on ‘Command Panel’. 2) Edit - Do you want to copy important text? - By using this function, text can be copied, additionally copied, and pasted. - Additional Copy’ is added after the previously copied contents. - Select corresponding text to apply on ‘Command Panel’. - Operated on versions above Android 4.4 or ShineQWERTY keyboard. 10. Tool 1) Short key - Do you want to quickly execute apps and contents? - By using this function, designate short key for apps/contents executed. - After, bring out short key execution by ‘down right turn swipe’. - Use in ‘Command Panel’. 2) Label - Do you want to label a name on image item? - By using this function, user can label image object to distinguish use for the future. - Label list is managed with ‘mobile accessibility’. - Use in ‘Command Panel’. 3) Marking - Do you want to reach particular location of the screen at once? - By using this function, designate particular location of screen so that it can be navigated at once in the future. - This function executes marking in ‘Command Panel’. Use ‘Top and Right Swipe’ when moving to corresponding location. 4) Version information - Do you want to know the version of the executed app? - By using this function, the version of activated app appears. - Use in ‘Command Panel’. 5) Screen Auto Read - Do you want to read all the contents of the screen? - When using this function, voice output reads the pointed out part of the screen in order. - Use in ‘Command Panel’ via ‘Top Swipe’. 6) Zoom All Text - Do you want to zoom contents of the whole screen? - By using this function, zoom is executed on pointed out parts of the screen in order. - Use in ‘Command Panel’ via ‘Top Swipe’. 7) Screen Character String - Do you want to search for a word in the screen? - By using this function, the screen moves to the page of the finding word. - Use in ‘Command Panel’. 8) Remove App - Do you want to remove app? - By using this function, remove the executed app immediately. - Use in ‘Command Panel’. 9) Translation - Do you want to use other country’s app? - By using this function, change foreign language to your language. - Use in ‘Command Panel’. 11. Search 1) Web List - Do you want to only see title on web document? - By using this function, screen moves to the location with title indicated. - Use in ‘Command Panel’. 2) Web Text - Do you want to only see text on web document? - By using this function, screen moves to the location with indicated text. - Use in ‘Command Panel’. 3) Web Input Window - Do you want to find input window on web document? - By using this function, the screen moves to the location with indicated input window. - Use in ‘Command Panel’. 4) Web phone Number - Do you want to find phone number on web document? - By using this function, the screen moves to the location with indicated phone number. - Use in ‘Command Panel’. 5) Web Search - Do you want to simply search the internet? - By using this function, search website on web search to move to corresponding website. - Use in ‘Command Panel’. 6) YouTube Search - Do you want to simply search videos? - By using this function, enter video search word to move to YouTube. - Use in ‘Command Panel’. 7) App Search - Do you want to find apps right away? - By using this function, enter app search word to move to store. - Use in ‘Command Panel’. 8) Voice Search - Do you want to search by talking? - By using this function, enter search word by talking and move to web. - Use in ‘Command Panel’. 12. Shortcut Setting 1) Main Shortcut Setting - Do you want to quickly apply main settings? - By using this function, you can quickly change ‘object type’, ‘notification method’, ‘Wi-Fi’, ‘Bluetooth’, and ‘Cover Mode’. - Use in ‘Command Panel’. 3) Media Shortcut Setting - Do you want to quickly change Volume, TTS Speed? - By using this function, ‘Media Volume’ and ‘TTS Speed’ can be changed quickly. - Media Volume is controlled in 8 stages from 30% to 100%. - TTS Speed is controlled in maximum of 8 stages. - Use in ‘Command Panel’ 3) Text Highlight Shortcut Setting - Do you want to quickly change magnification and speed of text? - By using this function, quickly change text highlight magnification and speed. - Text indication speed is controlled in 8 stages. - Use in ‘Command Panel’. 4) Manager Screen - Do you want to quickly execute main manager screen? - By using this function, quickly execute ‘Shortcut list’ ‘Shine Setting’. ‘Device Setting’, ‘Executed App List’, and ‘Notification Window’. - Use in ‘Command Panel’. * Main Service of ShinePlus Home 1) Composition of ShinePlus Home - ShinePlus Home is the main screen when executing ShinePlus icon. - ShinePlus Home is composed of various setting tools and contents to effectively use ShinePlus. 2) Web Contents - This is a public web bookmark. - Useful websites, information, videos, and other recommended web contents are added for presbyopia, people with bad vision, and the blind. 3) Mobile accessibility - This is the gathering of scripts that are applied to improve accessibility on main apps. - The apps applied with this script are attached with labels on image of screen, and are easy to operate. 4) Store - Registers useful specialized ShineTools, recommended apps, and useful recyclables for the blind. 5) Welfare Information - This space provides information of various events, employment, advertisement, and recruitment provided in local community.